fbpx skip to Main Content
Would you like to receive email notification when we update our website? Subscribe to get the latest news and project updates delivered right to your inbox, with the option to unsubscribe any time.


 

 

Would you like to receive email notification when we update our website? Subscribe to get the latest news and project updates delivered right to your inbox, with the option to unsubscribe any time.


 

 

This Post Has 8 Comments

  1. Hey north texas customs I have a 1981 chevy camaro. It still runs but it needs a lot of work. I know a lot goes into consideration when planning a restoration but I just need a broad price for a frame off restoration. I know it will not be cheap but any price will help. Thanks

    1. Hi Bryan, thank you for your interest in North Texas Customs for your Camaro project. The condition of the vehicle plays a important role in the amount of labor required, as well as the wide array of needs and options regarding materials and parts. We’ve sent you an email with more info, so please let us know if you have any additional or specific questions we can answer for you.

  2. Hi Theo, it’s difficult to give an estimate as there are so many variables to take into account. Ultimately price is based on time and material, so depending on what your car needs to get from its current condition to paint-ready will determine most of the cost. Already having your paint will save you money as specialty paints are very expensive, however they also take longer to apply. If you can give us a call or stop by, we’d be happy to go over your project in more detail. Thanks!

  3. hey tx customs…. im in Dallas tx and i have a 1988 caprice clasice… No dents…but right fender, but i do have another fender to replace it…..body fair… and i already have the house of kolor Brandywine.. paint…. i know i need hardner but what would my $price$ range be……????????

    1. Your address has been added to the subscription list; you should receive a confirmation email. Sent you a message as well; we’d be happy to help with your grill.

  4. I am looking for a chrome grill for a 1937 Dodge. Could make this for me and what is the cost. Any information you can give me would be great. Thanks, Vince

    1. Hi Vince, yes we can fabricate a grill; if you have not yet seen it, here’s a photo of one we made for a ’37 Dodge. Cost is based on fabrication time and materials, which will depend on the complexity of the design, and then the chroming process. If you can give us a call at 972-442-9793 or bring the car by, we can get some specs and discuss what you are wanting done. Thanks!

Leave a Reply to North Texas Customs Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Back To Top