fbpx skip to Main Content
Would you like to receive email notification when we update our website? Subscribe to get the latest news and project updates delivered right to your inbox, with the option to unsubscribe any time.


 

 

Getting in Gear On Our ’40 Ford Pickup

We’ve been mulling over doing our own build for some time now. While on the hunt for something with classic Art Deco styling, we came across a 1940 Ford pickup in workable shape. It looked to be a fun one to hot rod, quicker than a car and with less parts, which fit the bill for “shop project” nicely; we decided to make a go of it. A short road trip later, the 70-year-old faded Ford was on its way to a new life.

On arrival, the truck was mainly just sheet metal, sitting on a Chevy frame. Within a few days, we tore it apart and sent it through our media blasting booth to remove all the rust and see exactly what we’d be working with; the sheet metal was coated in PPG epoxy primer after blasting to preserve it going forward. The diagnosis: fortunately the doors and fenders were in great shape, and the hood only needed a small patch and a few pinholes filled. The cab, running boards, and bed were going to need a little more TLC.

Due to the Chevy chassis that the truck came on, we had to locate a replacement. Another road trip was in order, this time to Kansas for a 35-40 Ford frame. Once back at the shop it was also stripped down, a few spots fixed and brackets removed (since the frame was a trailer at one time in its life), and into the blasting room it went. We followed with a coat of PPG industrial line paint in a custom-mixed cool gray with a slight blue tint, for a nice peekaboo under the body.

Fab work was about to get underway and the search was on for suspension parts and an engine…

Stay tuned for updates as the North Texas Customs hot rod comes along…

*UPDATE #1: click here

*UPDATE #2: click here

And of course, visit our 1940 Ford Pickup photo gallery to see all of the build pics for this project.

This Post Has 7 Comments

    1. It was an individual we found through classifieds on the H.A.M.B. forum hosted by Jalopyjournal.com. You might check there or just scour the classifieds until one pops up.

  1. I’m building a ’40 for p/u on a ’94 blazer chassis, 350. Chassis’s been stretched. Where can I get info on scratch building the bed or a custom bed? Also, how can I get a cadillac ride out of stock suspension w/o air bag or other expensive ways? Any help is appreciated, thanks, Jim

  2. Thanks, yes, going with a 1952 8BA flat head out of a pickup, with a T5 transmission. Will be updating soon with pics and progress.

Leave a Reply to Gene Carter Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Back To Top