Pullmax Stamping a Bed Floor
Here we are running a bed floor for a 1951 Studebaker on our Pullmax. We created 1" thick dies that form two beads with each pass. Multiple passes are made until the desired depth is reached. This is 16ga steel.
Here we are running a bed floor for a 1951 Studebaker on our Pullmax. We created 1" thick dies that form two beads with each pass. Multiple passes are made until the desired depth is reached. This is 16ga steel.
A walkthough of our 6,000 sq ft dedicated fabrication facility. In this area we perform custom fabrication, sheet metal repair, welding, panel installation, chopping, and related metal work. Projects featured in this video include a 1919 C-Cab, 1930 Model A,…
Thought we'd share some shots of the fabrication work going into this 1939 Dodge coupe lead sled build. We are making rockers, floor pans, trunk, and tool pocket. Also welded in the rear fenders which will be leaded in after blasting.
In building this '39 Dodge coupe, we are tearing it down now and plan to install a 318 engine, an a833 transmission, a Ford Explorer rear, front disks, and lower it just a touch. We'll be posting updates as it…
Thought we'd post another update on our shop project, a 1940 Ford Pickup, as we've made some progress since the last update. If you missed the first post, make sure to check it out here so you can see some…
We've been updating the North Texas Customs photo gallery with tons of classic, muscle car and hot rod project pics from the past year. If you haven't visited recently, check it out and see what we've been up to! Lots…
Thought we'd post an update on our shop project, a 1940 Ford Pickup, since it's been awhile. If you missed the first post, make sure to check it out here so you can see some "before" pics. As we discovered…